ECLISSE דלתות אקליס

ACCESSORIES

ACCESSORIES

ACCESSORIES FOR ECLISSE SLIDING DOORS

ACCESSORIES FOR ECLISSE SLIDING DOORS

DOUBLE DOOR CO-ORDINATION FOR CLASSIC

DOUBLE DOOR CO-ORDINATION FOR SYNTESIS® FLUSH

TELESCOPIC SYNCHRONISATION

ANTI-WARP PROFILE

/ ”

/ ”

5/8”

5/8”

1/4” / ”

5/16” / ”

Specifically designed for sliding pocket door systems without jambs, this accessory allows to open and close the two doors simultaneously by moving only one door at a time.  ECLISSE BIAS® included as standard. For door panels up to 25+25 kg it slows down and gently closes the doors. For door panels over 25+25 kg and up to 50+50 kg it slows down the closing movement. Suitable for wooden doors only, it can be installed on ECLISSE SYNTESIS® LINE DOUBLE and ECLISSE SYNTESIS® LUCE DOUBLE with passage width from 600+600 mm to 1000+1000 mm. Thanks to the ECLISSE patented extractable track, it can also be retrofitted to an already installed pocket door system. Note: for pocket door systems with passage widths of 600+600 mm, the door panels protrude from the pocket so the actual passage width is reduced.

The synchronisation for telescopic sliding pocket door systems allows the simultaneous and harmonious movement of the two door panels which slide in the same direction, gently and without tearing: the first door panel drags the second one and the two panels slide together. It can be installed directly to the door panels with no need to replace the track.  Max. door weight 40 kg.  Compatible with ECLISSE BIAS®. For door panels up to 25+25 kg it slows down and gently closes the doors. For door panels over 25+25 kg and up to 50+50 kg it slows down the closing movement.  ECLISSE TELESCOPIC DOUBLE requires 2 synchronisations and (optionally) 2 ECLISSE BIAS®. Suitable for wooden doors only, it can be applied on ECLISSE TELESCOPIC SINGLE and ECLISSE TELESCOPIC DOUBLE with coupled door panels from 600+600 mm to 1200+1200 mm.

ECLISSE offers an extruded aluminium guide section, specifically designed and developed to be fitted into the bottom of sliding pocket doors. This profile is easy to fit even on an already installed pocket door, requiring no special processing apart from a milled recess along the lower edge of the door panel. The technical perfomances offered by the anti-warp profile are an improved sliding action, an increased wear resistance and protection against deformation due to humidity. The aluminium guide has been designed to fit perfectly the dimensions of the self-centering door guide that comes as standard with all ECLISSE counterframes. To install it, simply adapt the milling to the profile size.

The synchronised movement of double sliding pocket doors enables both door panels to be opened or closed together by moving only one panel.  ECLISSE BIAS® included as standard. For door panels up to 25+25 kg it slows down and gently closes the doors. For door panels over 25+25 kg and up to 50+50 kg it slows down the closing movement. Suitable for wooden doors only, it can be installed on ECLISSE DOUBLE, ECLISSE LUCE DOUBLE and ECLISSE EWOLUTO® DOUBLE with passage width from 600+600 mm to 1000+1000 mm. Thanks to the ECLISSE patented extractable track, it can also be retrofitted to an already installed pocket door system. Note: for pocket door systems with passage widths of 600+600 mm, the door panels protrude from the jambs so the actual passage width is reduced.

HARDWARE ACCESSORIES

/ ”

/ ”

5/8”

5/8”

1/4” / ”

5/16” / ”

Note: when fully opened, the door panels protrude slightly from the jambs so the actual passage width is reduced.

40

40

17

15

= 10 =

= 7 =

Detail of the door panel with standard door guide (milled only).

Detail of the door panel with anti-warp profile installed.

170 - ECLISSE CATALOGUE

ECLISSE CATALOGUE - 171