H31511411

INSTALLATION

1

2

3

1

Ø4*16

1

2

2

1-1.Take out the main part, open the crank and keep the direction as show the above. 1-2.Remove the mounting bracket from the main part.

3-1.Install the main part onto the mounting bracket and fasten with the clamping position. 3-2.Press up the other side of the main part with the mounting bracket.

According to the installation sheet, install the mounting bracket on the top of inside cabinet and fix with three Ø4*16 countersunk head screws.

4

5

6

1

2

Ø4*14

Press the crank back to the front for fixing.

6-1.Push out the chute cover and put the slider. 6-2.Push back the chute for buckling.

Release the push rod until it’s full open. Make sure the chute is relatively parallel to the push rod.

7

8

9

Put the chute cover into the rail by following arrow direction to install.

Fasten the screw after checking whether or not it function well.

Push in the screw cover cap by following arrow direction.