KL788.7.2050 KLEIBERIT דבק 788.7

KLEIBERIT 538.1

KLEIBERIT 538.1

Properties of the bond Demonstrated with the example of tensile strength according to DIN EN 1465 Material Temperature (°C) Tensile shear 788.7 דבק דבק חם גרגירי להדבקת קנטים מיועד לעבודה ידנית ולמכונת קנטים במהיריות הזנה נמוכות strength (N/mm²)

2C-PUR- Adhesive

Fields of application  As adhesive for very high stressed bondings of metals, glass, wood and many plastics to each other  As fixing compound for threads and screws  As moulding for device construction and the like Advantages  Universally applicable, hardens without shrinkage  High resistance to heat and cold  Good ageing properties Properties of the bonding agent Two-component system, free from solvents Base: polyurethane Component A: KLEIBERIT 538.1 Component B: KLEIBERIT 870.0 Specific gravity:

2C-PUR- Adhesive

Properties of the bond Demonstrated with the example of tensile strength according to DIN EN 1465 Material Temperature (°C) Tensile shear aluminium to alumium (ground and degreased) -20 +20 +80 aluminium to steel (ground and degreased) -20 +20 +80 Steel to steel (ground and degreased)

12.5 12.0 11.5 15.0 14.0 14.2 28.5 27.6 17.6

-20 +20 +80

Fields of application  As adhesive for very high stressed bondings of metals, glass, wood and many plastics to each other  As fixing compound for threads and screws  As moulding for device construction and the like Advantages  Universally applicable, hardens without shrinkage  High resistance to heat and cold  Good ageing properties Properties of the bonding agent Two-component system, free from solvents Base: polyurethane Component A: KLEIBERIT 538.1 Component B: KLEIBERIT 870.0 Specific gravity:

strength (N/mm²)

The aluminium broke in test 1 and 2

aluminium to alumium (ground and degreased) aluminium to steel (ground and degreased) Steel to steel (ground and degreased) EVA קופולימר Comp. A: approx. 1.52 g/cm³ Comp. B: approx. 1.22 g/cm³ Mixture: approx. 1,41 g/cm³ דבק חם גרגירי להדבקת קנטים comp. A:comp. B = 2.5:1 by weight comp. A:comp. B = 2.0:1 by volume

-20 +20 +80 -20 +20 +80 -20 +20 +80 12.5 12.0 11.5 15.0 14.0 14.2 28.5 27.6 17.6 Properties of the binding material Hardness: 80-85 Shore D (ISO 868) Tensile strength: 45 MPa (ISO 527) Elongation at break: 5.9 % (ISO 527) Modulus of elasticity: 1550 MPa (ISO 527) Bending strengths: 62 MPa (ISO 178) Deflection: 6,5 mm (ISO 178) Linear coefficient of thermal expansion: 6,5•10 -5 .K -1 (-20°C bis +40°C) Water absorbtion: 0,08%

תיאור

Mixing ratio:

בסיס

Colour of the mixture: light-grey

(24 hours at 23°C)

(תלוי בסוג הקנט) 100°C כ-

עמידות בחום

The aluminium broke in test 1 and 2

Identification:

Comp. B: identification required according to EU regulations, contains 4.4 diphenyl methane diisocyanate (see our safety data sheet).

(עמידות מצוינת, תלוי בסוג הקנט) 30°C כ-

עמידות בקור

Properties of the binding material Hardness: 80-85 Shore D (ISO 868) Tensile strength: 45 MPa (ISO 527) Elongation at break: 5.9 % (ISO 527) Modulus of elasticity: 1550 MPa (ISO 527) Bending strengths: 62 MPa (ISO 178) Deflection: 6,5 mm (ISO 178) Linear coefficient of thermal expansion: 6,5•10 -5 .K -1 (-20°C bis +40°C) Water absorbtion: 0,08% comp. A: 3,200  800 mPa.s comp. B: 150  50 mPa.s mixture: 900  300 mPa.s good flowing properties approx. 90 minutes 50°C 80°C approx. 80 minutes approx. 30 minutes Note : ריהוט ונגרות

Viscosity at 20 °C (Brookfield Sp. 4/20rpm):

Intended for commercial use only.

, נייר, פורניר, מלמין ועוד. PVC ,ABS מתאים להדבקת קנטים מפלסטיק,

שימוש

(24 hours at 23°C) Optimal adhesion of the adhesive to the metal surface is achieved with sanding or sandblasting. Acetone is recommended for cleaning working tools. The ideal working temperature is 20 °C. Application methods  Manual with spatula, brush  Automatically with two component mixing and dosing plant Preparation The surfaces to be glued must be free of rust, dust and grease. Metal and plastic surfaces must be roughened. Remove rust and oxide spots from the metal.

Comp. A: approx. 1.52 g/cm³ Comp. B: approx. 1.22 g/cm³ Mixture: approx. 1,41 g/cm³

Consistency:

Pot life (100 g mixture at 20°C):

יישום

Fixing time

20°C

Mixing ratio:

comp. A:comp. B = 2.5:1 by weight comp. A:comp. B = 2.0:1 by volume (steel sheet, 1 mm thickness, surface 2 cm²)

approx. 8 hours

צמיגות

These are guide values only and are dependent on the object. מותאם לעבודה במהירויות הזנה נמוכות. 30°C - 200°C מומלץ במיכל התכה ובגליל/דיזה

Colour of the mixture: light-grey

טמפרטורת עבודה

מהירות הזנה מינימלית

Identification: מטר 5- דקה - החל מ

Restricted to professional users

Page 1 of 2

Comp. B: identification required according to EU regulations, contains 4.4 diphenyl methane diisocyanate (see our safety data sheet).

צורת אספקה

גרגירים

Viscosity at 20 °C (Brookfield Sp. 4/20rpm):

גוון

שנהב (בז')

comp. A: 3,200  800 mPa.s comp. B: 150  50 mPa.s mixture: 900  300 mPa.s

Note :

Intended for commercial use only.

אריזה ומשקל

ק"ג 25 שק של

Application methods  Manual with spatula, brush  Automatically with two component mixing and dosing plant Preparation The surfaces to be glued must be free of rust, dust and grease. Metal and plastic surfaces must be roughened. Remove rust and oxide spots from the metal. Optimal adhesion of the adhesive to the metal surface is achieved with sanding or sandblasting. Acetone is recommended for cleaning working tools. The ideal working temperature is 20 °C. • תכונות התכה מצוינות. • זמן הדבקה קצר וכושר הדבקה גבוה. • איכות הדבקה טובה למגוון רחב של קנטים. • עמידות טובה בחום וקור. יח' 1 גרמניה

Consistency:

good flowing properties

כמות באריזה

Pot life (100 g mixture at 20°C):

approx. 90 minutes

ארץ ייצור

Fixing time (steel sheet, 1 mm thickness, surface 2 cm²)

20°C

50°C

80°C

approx. 8 hours

approx. 80 minutes

approx. 30 minutes הוראות שימוש

יתרונות ומאפיינים

These are guide values only and are dependent on the object. • יש לאחסן במקום קריר ויבש. • יש לשמור על האריזה סגורה היטב. • . 18°C טמפרטורת סביבה מומלצת מעל • מומלץ לעיין בדף מידע לפני השימוש.

Restricted to professional users

Page 1 of 2

9976500 מיקוד 398 . משרדי הנהלה ואולם תצוגה ראשי: מבוא חורון ת.ד www.hgt.co.il | hgisrael@hgt.co.il | 03-6815308 : פקס | 03-5136100 : משרד