H31511411
מנגנון לחץ פתח לדלת ארון עד 25 קג
X1
X4
X2
MAIN PART
Ø4*16
SCREW COVER
X1
X2
X2
CHUTE SCREW COVER
Ø4*14
CHUTE
INSTALLATION DIAGRAM
BK-BF1507 BK-BF1520 BK-BF1525
BK-BF1507 : Weight capacity : 7.5 GWS , size limit : 700 mm X 600 mm BK-BF1520 : Weight capacity : 20 GWS , size limit : 2200 mm X 600 mm BK-BF1525 : Weight capacity : 25 GWS , size limit : 2800 mm X 600 mm *Only work with spring-free hinge
BK-BF1507
BK-BF1520
BK-BF1525
5
8
INSTALLATION
1
2
3
1
Ø4*16
1
2
2
1-1.Take out the main part, open the crank and keep the direction as show the above. 1-2.Remove the mounting bracket from the main part.
3-1.Install the main part onto the mounting bracket and fasten with the clamping position. 3-2.Press up the other side of the main part with the mounting bracket.
According to the installation sheet, install the mounting bracket on the top of inside cabinet and fix with three Ø4*16 countersunk head screws.
4
5
6
1
2
Ø4*14
Press the crank back to the front for fixing.
6-1.Push out the chute cover and put the slider. 6-2.Push back the chute for buckling.
Release the push rod until it’s full open. Make sure the chute is relatively parallel to the push rod.
7
8
9
Put the chute cover into the rail by following arrow direction to install.
Fasten the screw after checking whether or not it function well.
Push in the screw cover cap by following arrow direction.
LEFT DOOR
CODE INSET DOOR
FULL OVERLAY DOOR HALF OVERLAY DOOR
A= THICKNESS OF DOOR D= THICKNESS BETWEEN TOP PANEL AND DOOR
32+Amm 12+Amm 9+Dmm
32mm 12mm
41mm 12mm
B C E
9+Dmm
9+Dmm
MAIN PART INSTALLATION (TOP VIEW)
203
SIDE PANEL
70
B
69
69
C
DOOR
CHUTE INSTALLATION (FRONT VIEW)
D
OVERLAY DOOR LINE
TOP PANEL/ INSET DOOR LINE
E
80
112
UNIT:mm
RIGHT DOOR
CODE INSET DOOR
FULL OVERLAY DOOR HALF OVERLAY DOOR
A= THICKNESS OF DOOR D= THICKNESS BETWEEN TOP PANEL AND DOOR
32+Amm 12+Amm 9+Dmm
32mm 12mm
41mm 12mm
B C E
9+Dmm
9+Dmm
MAIN PART INSTALLATION (TOP VIEW)
203
70
69
69
B
SIDE PANEL
C
DOOR
CHUTE INSTALLATION (FRONT VIEW)
D
OVERLAY DOOR LINE
TOP PANEL/ INSET DOOR LINE
E
112
80
UNIT:mm
Made with FlippingBook flipbook maker